Tourer
Identifying Features:
Wire wheels, large brakes, circular section axle, single plug, single cam engine
Years Made
(approx): End 1927-30
Number Made:
1095
Engine:
No of cylinders: 8
Bore x stroke: 69 x 100mm
Capacity: 2991cc
BHP (approx): 80
RPM Limit (prudent): 4000
Camshaft: sohc
Valves (per cylinder): 3
Camshaft drive: Central, bevel
Crankshaft bearings: 9 plain, plain rods
Carburettor: 1 Schebler
Ignition: Coil
Plugs per cylinder: 1
Firing Order: 1, 6, 2, 5, 8, 3, 7, 4*
Clutch:
Type: Wet, multi-plate
Gearbox:
Location: Central, Separate, 4-speed and reverse
Gear change lever: Central, gate
Rear Axle:
Normal Ratio: 12/50 = 4.16
Dimensions:
Wheelbase: 122.8in (3.122m)
Track: 49.2in (1.25m)
Weight (approx): 2400lb (1100kg)
Brakes:
Location and Type: 4-wheel, cable operated
Brake drum diameter: 330mm
Wheels:
Type: Wire
Tyre size: Original 28 x 4.95; modern fitment 5.00 x 19
Crossbreeding with Other Types:
Similar in most respects to later T49
* Some early engines were 1, 5, 2, 6, 4, 8, 3, 7
NOTE: Engines from No. 292 have pressure fed lubrication (oil gallery pipe with 9 unions not 8) and low mounted pump